Added the relevent parts of the .config directory. Alss add ssh config

1 files changed, 52 insertions, 0 deletions

diff --git a/vimwiki/Set up DHCP or static IP Address from CLI.md b/vimwiki/Set up DHCP or static IP Address from CLI.md
new file mode 100644
index 0000000..96a88d8
--- /dev/null
+++ b/vimwiki/Set up DHCP or static IP Address from CLI.md
@@ -0,0 +1,52 @@
+This guide will show how to setup DHCP or static IP address from command line. 
+For full details see [the blackmoreops site:](https://www.blackmoreops.com/2015/03/26/setup-dhcp-or-static-ip-address-from-command-line-in-linux/)
+
+1. STOP and START Networking service
+	
+	`# /etc/init.d/networking stop` 
+	
+	`# /etc/init.d/networking start` 
+	
+	In systems using systemd, then use the following instead:
+	`# systemctl stop network.service`
+	
+	`# systemctl start network.service`
+	
+2.  STOP and START Network-Manager
+	`# systemctl stop NetworkManager.serviced`
+	
+	`# systemctl start NetworkManager.serviced`
+	
+3.  Bring up network interface
+	`# ifconfig eth0 up`
+	
+	or 
+	
+	`ifup eth0`
+	
+	At this point the interface doesn't have an IP address 
+	assigned as can be checked by the following command:
+	
+	`# ifconfig eth0`
+	
+4.  Setting up IP Address via DHCP
+	`# echo "iface eth0 inet dhcp >> /etc/network/interfaces"`
+	
+	and then bring up the interface as in previous step.
+	
+5.  Setting up Static IP
+	`# ifconfig eth0 192.168.43.226`
+	`# ifconfig eth0 netmask 255.255.255.0`
+	`# ifconfig eth0 broadcast 192.168.43.255`
+	` route add default gw 192.168.43.1 eth0`
+	
+6.  Alternative way of setting up Static IP
+	`#  echo -e “iface eth0 inet dhcp\n address 10.1.1.2\n netmask 255.255.255.0\n gateway 10.1.1.1″>>/etc/network/interfaces`
+	
+7.  Fix missing Default Gateway
+	`# ping 8.8.8.8`
+	
+8.  Setting up Nameserver/DNS
+	`# echo “nameserver 8.8.8.8\n nameserver 8.8.4.4″ >>/etc/resolv.conf`
+	
+