1 files changed, 236 insertions, 0 deletions
diff --git a/.cheat/luna b/.cheat/luna
new file mode 100755
index 0000000..9980219
--- /dev/null
+++ b/.cheat/luna
@@ -0,0 +1,236 @@
+#Connect to any (known) WAP in range (or simply turn on WiFi):
+
+luna-send -n 1 palm://com.palm.wifi/setstate '{"state":"enabled"}'
+luna-send -n 1 palm://com.palm.wifi/findnetworks '{""}'
+
+
+#Disconnect from WiFi:
+
+luna-send -n 1 palm://com.palm.wifi/setstate '{"state":"disabled"}'
+
+#Turn Bluetooth ON:
+
+luna-send -n 1 palm://com.palm.btmonitor/monitor/radioon '{"visible":true, "connectable":true}'
+
+#Turn Bluetooth OFF:
+
+luna-send -n 1 palm://com.palm.btmonitor/monitor/radiooff {}
+
+#Using luna-send to refresh the Launcher panel.
+
+luna-send -n 1 palm://com.palm.applicationManager/rescan {}
+
+
+#Get a list of all installed apps:
+
+luna-send -n 1 "palm://com.palm.applicationManager/listLaunchPoints" "{}"
+
+
+#Using luna-send to launch an application:
+
+luna-send -n 1 palm://com.palm.applicationManager/launch {\"id\":\"com.palm.app.browser\"}
+luna-send -n 1 palm://com.palm.applicationManager/launch {\"id\":\"com.palm.app.browser\",\"params\":{\"scene\":\"page\",\"target\":\"http://www.google.com\"}}
+
+
+#Using luna-send to download a file to /media/internal/downloads/:
+
+luna-send -n 1 palm://com.palm.downloadmanager/download {\"target\":\"http://www.google.com/index.html\"}  
+
+
+#Using luna-send to first import and then set the wallpaper image:
+
+luna-send -n 1 palm://com.palm.systemservice/wallpaper/importWallpaper {"target": "/media/internal/wallpapers/your_file.jpg" }
+luna-send -n 1 palm://com.palm.systemservice/setPreferences {"wallpaper": {"wallpaperName": "your_file.jpg", "wallpaperFile": "/media/internal/wallpapers/your_file.jpg"}}
+
+
+
+#Using luna-send to control the palm progress animation (The pulsing "palm" logo seen at boot):
+
+luna-send -n 1 palm://com.palm.systemmanager/runProgressAnimation {\"state\":\"start\"}
+luna-send -n 1 palm://com.palm.systemmanager/runProgressAnimation {\"state\":\"stop\"}
+
+#TODO: These should probably be plugged into the Tracker app.
+
+
+luna-send -n 1 palm://com.palm.location/setUseGps {\"useGps\":\"true\"}
+luna-send -n 1 palm://com.palm.location/setAutoLocate {\"autoLocate\":\"true\"}
+luna-send -n 1 palm://com.palm.location/getCurrentPosition {}
+
+
+#List all of the processes which are running:
+
+sudo luna-send -n 1 palm://com.palm.applicationManager/running {}
+** Message: serviceResponse Handling: 2, { "running": [ { "id": "com.palm.launcher", "processid": "1006" }, { "id": "com.palm.systemui", "processid": "1007" }, { "id": "com.palm.app.email", "processid": "1000" }, { "id": "com.palm.app.phone", "processid": "1001" }, { "id": "com.palm.app.contacts", "processid": "1002" }, { "id": "com.palm.app.camera", "processid": "1003" }, { "id": "com.palm.app.messaging", "processid": "1004" }, { "id": "com.palm.app.calendar", "processid": "1005" }, { "id": "com.palm.app.phone", "processid": "1008" }, { "id": "com.palm.app.camera", "processid": "1014" } ] }
+
+
+#Close a process:
+
+luna-send -n 1 "palm://com.palm.applicationManager/close" "{\"processId\":\"1058\"}"
+
+
+#Activate the vibrator:
+
+luna-send -n 1 palm://com.palm.vibrate/vibrate {\"period\":1,\"duration\":1000\}
+
+#The duration value is in milliseconds and can be adjusted as desired.
+
+
+#Photos Info - list album and image from mediadb.db3:
+
+luna-send -n 1 luna://com.palm.mediadb/image/listalbums {}
+
+luna-send -n 1 luna://com.palm.mediadb/image/listimages {}
+
+
+#Set system volume - "volume" range is 0-100
+
+luna-send -n 1 palm://com.palm.audio/system/setVolume '{"volume":80}'
+
+
+#Set media volume - "volume" range is 0-100
+
+luna-send -n 1 palm://com.palm.audio/media/setVolume '{"volume":80}'
+
+
+#Set ringtone volume - "volume" range is 0-100
+
+luna-send -n 1 palm://com.palm.audio/ringtone/setVolume '{"volume":100}'
+
+
+#Dial a number - this actually calls the number, not just setup
+
+luna-send -n 1 palm://com.palm.telephony/dial '{"number":"8001234567"}'
+
+
+
+#Hang up a phone call :-) There are ways to end specific types of calls but I think this is good enough for now. Let me know if you want the other methods.
+
+luna-send -n 1 palm://com.palm.telephony/hangupAll {}
+
+
+#Send a text message - only need to change phone "value" and "messageText"
+
+luna-send -n 1 palm://com.palm.messaging/sendMessageFromCompose '{"recipientJSONArray": [{"lastName": "", "pictureLoc": "", "contactCount": 1, "displayText": "", "firstName": "", "pictureLocBig": "", "imAvailability": 6, "pictureLocSquare": "", "contactDisplay": "", "Person_id": "", "personId": "", "type": "phone", "value": "8165551234", "alreadyValidated": true, "prefix": "to$A", "identifier": ""}], "messageText": "Content of message here"}'
+
+
+#set phone to no roam (home network only)
+
+luna-send -n 1 palm://com.palm.telephony//roamModeSet '{"mode":"homeonly"}'
+
+
+#set phone to auto roam
+
+luna-send -n 1 palm://com.palm.telephony//roamModeSet '{"mode":"any"}'
+
+
+#set phone to roam only
+
+luna-send -n 1 palm://com.palm.telephony//roamModeSet '{"mode":"roamonly"}'
+
+
+#Applications
+
+#Notes (view notes):
+
+luna-send -n 1 palm://com.palm.notes/getNotes {}
+
+
+#Storage
+
+#Enter usb storage mode:
+
+luna-send -n 1 palm://com.palm.storage/diskmode/enterMSM {\"user-confirmed\":true,\"enterIMasq\":false}
+
+
+#Exit usb storage mode (toggle):
+
+luna-send -n 1 palm://com.palm.storage/diskmode/enterMSM {\"user-confirmed\":true,\"enterIMasq\":false}
+
+#Airplane Mode
+
+#Enable Airplane Mode:
+
+luna-send -n 1 palm://com.palm.systemservice/setPreferences '{"airplaneMode":true}'
+
+
+#Disable Airplane Mode:
+
+luna-send -n 1 palm://com.palm.systemservice/setPreferences '{"airplaneMode":false}'
+
+# Fix messaging thread problem (from Grabber5.0 
+# http://forums.webosnation.com/palm-pre-2/272900-sms-issue-messages-can-no-longer-displayed-conversation.html)
+
+"The hardest part is tracking down the person id if you have a lot of contacts. 
+
+You have to get the id of the chat thread and the person, using Impostah. 
+The easiest thing to do is save the object to a file while viewing it in Impostah 
+(you will prob have to change the filename, as the display name for the chat thread 
+and person id are likely the same, and that is what is used for the default filename. 
+I prefixed the chat thread filename with "chatthread"). Finding the person id can take 
+a while if you have a lot of contacts. 
+
+Then run this command, filling in the chat thread id and person id. 
+The phone# is probably not required, but I supplied it anyway, just copying the value from the chat thread."
+
+
+#Person object and chatthread object saved from Impostah so we can grab the chatthread id 
+#and person id for the merge command.
+#
+##Update chat thread person id and locked flag.  Reply address prob not necessary (it is not changing)
+
+luna-send -n 1 -a com.palm.app.messaging luna://com.palm.db/merge '
+{"objects":[{"_id":"XXXXXXXX","personId":"XXXXXXX","flags":{"locked":false},"replyAddress":"(999) 555-1212"}]}'
+
+#
+#Get chatthread to confirm changes.
+#
+
+luna-send -n 1 -a com.palm.app.messaging luna://com.palm.db/get '{"ids":["XXXXXXXX"]}'
+
+
+# Use palm-install to install ipk
+Usage: palm-install [OPTION...] [PACKAGE | APP_ID]
+Install or remove applications from a HP webOS device.
+
+Options:
+-d, --device=DEVICE     Specify DEVICE to use
+    --device-list       List the available devices
+-l, --list              List the installed applications
+-r, --remove            Remove applications instead of installing
+--version               Display version info and exit
+--help                  Display this help and exit
+
+PACKAGE is the file path of the package to install,
+e.g. ~/projects/packages/com.example.app_1.0_all.ipk.
+
+APP_ID is the id of the application to remove.
+
+DEVICE is a unique identifier which matches a device name, type, or id
+(as returned by the device-list option). e.g. Use "usb" for a usb-connected
+device, or "tcp" for an emulator (note: emulator must be running). If not
+specified, the first device found is used.
+
+# Install package
+palm-install ~/projects/packages/com.example.app_1.0_all.ipk
+
+# Remove application
+palm-install -r com.example.app
+
+# List applications on default device
+palm-install -l
+
+# List applications on usb device
+palm-install -d usb -l
+
+# List applications on emulator
+palm-install -d tcp -l
+
+# Make apps fit the whole screen Pre3
+# transfer metadata.json to the folder of each application not working correctly
+# 
+# /media/cryptofs/apps/usr/palm/applications/(whatever app)
+# 
+# metadata.json can be found at /MacOSX-Data1/Computing/Palm/webos/Archive/games patch/metadata.json  
+
+# Place Pre3 in recovery mode.
+Reboot with letter R pressed, and the pre3 will reboot into recovery mode. Can then connect to USB to doctor.